Cleaning black fenders & bumpers
#1
JK Enthusiast
Thread Starter
Join Date: Jul 2009
Location: LA
Posts: 360
Likes: 0
Received 0 Likes
on
0 Posts
Cleaning black fenders & bumpers
Just wanted to let everyone know that those melamine sponges (Mr. Clean Magic Erasers, etc.) do an awesome job of getting mud stains off of the black plastic parts. I had tried everything from soap and water to concentrated white wall wash, all with an aggressive scrub brush, and the mud was winning. These actually work pretty well at leaving the fenders clean so you can apply a protectant of your choice. FWIW, I used the grocery store brand version, and it worked just as well, and was a lot cheaper.
Just wanted to let folks know.
Jason
Just wanted to let folks know.
Jason
#4
thanks for the tip, i will try it out. I need to get the rest of the clay out of my soft top. for the fenders i got CLOSE with a commercial self service car wash and got them clean. Followed with 303 spray.
#6
JK Enthusiast
Join Date: Aug 2007
Location: Ft. Irwin, CA (But Willamsburg VA is home)
Posts: 378
Likes: 0
Received 1 Like
on
1 Post
Appreciate the info as well.
BTW, I bought a bottle of Meguires black restore today, supposedly designed for plastic bumpers, etc. It did make the bumpers look a little better, but what it really shined on are the stock Rubi rock-rails. Mine were looking like butt......and they look brand new after trying the Meguires black restore this afternoon.
BTW, I bought a bottle of Meguires black restore today, supposedly designed for plastic bumpers, etc. It did make the bumpers look a little better, but what it really shined on are the stock Rubi rock-rails. Mine were looking like butt......and they look brand new after trying the Meguires black restore this afternoon.
#7
JK Enthusiast
Thread Starter
Join Date: Jul 2009
Location: LA
Posts: 360
Likes: 0
Received 0 Likes
on
0 Posts
No problem, glad to share.
I should probably add though, that you still have to use a bit of elbow grease, and you still can't tell if you got it all until the plastic gets dry (the dirt is damn near invisible while the fenders are wet), but the stains came off much much easier with the melamine sponge and water than it did with strong chemicals and brushes. One sponge was exactly big enough to get all of my black plastic clean.
Jason
I should probably add though, that you still have to use a bit of elbow grease, and you still can't tell if you got it all until the plastic gets dry (the dirt is damn near invisible while the fenders are wet), but the stains came off much much easier with the melamine sponge and water than it did with strong chemicals and brushes. One sponge was exactly big enough to get all of my black plastic clean.
Jason
Trending Topics
#10
JK Enthusiast
Thread Starter
Join Date: Jul 2009
Location: LA
Posts: 360
Likes: 0
Received 0 Likes
on
0 Posts
Soap and water then some turtle wax ice- liquid wax, works like a charm
I've been using Mother's Back to Black on them as a protectant, but will probably order some 303 over the net. No one here stocks it.
Jason