Dropped Pitman Arm & Currie Front Trackbar Relocation Bracket
07-20-2009 | 01:41 PM
#1
Thread Starter
JK Enthusiast
Joined: Aug 2007
Posts: 193
Likes: 0
From: Ridgway, CO
SOLD - Dropped Pitman Arm & Currie Front Trackbar Relocation Bracket
---------------------------SOLD-----------------------------------
I have a dropped Pitman Arm and a Currie front track bar bracket that I didn't end up installing. (Went with the flipped draglink instead)
The Currie bracket has ever been installed and is still in the original factory box. The pitman arm was purchased on these forums a few months ago, but is still in great shape. (I never installed it)
In case you are unfamiliar with this bracket, it is a nice solid one that requires welding. It isn't one of those cheap ones that can break off leaving you stranded! The bracket is designed for use with a 2.5" - 4" lift and reusing your factory track bar. (Although you can still use an adjustable one for fine tuning)
New, these two pieces would cost over $100 + shipping. I'll ship both for only $65! Or you can come pick them up in Eagle, CO for $55.
(PayPal is my preferred method of payment.)
I have a dropped Pitman Arm and a Currie front track bar bracket that I didn't end up installing. (Went with the flipped draglink instead)
The Currie bracket has ever been installed and is still in the original factory box. The pitman arm was purchased on these forums a few months ago, but is still in great shape. (I never installed it)
In case you are unfamiliar with this bracket, it is a nice solid one that requires welding. It isn't one of those cheap ones that can break off leaving you stranded! The bracket is designed for use with a 2.5" - 4" lift and reusing your factory track bar. (Although you can still use an adjustable one for fine tuning)
New, these two pieces would cost over $100 + shipping. I'll ship both for only $65! Or you can come pick them up in Eagle, CO for $55.
(PayPal is my preferred method of payment.)
Last edited by ammonm; 07-22-2009 at 07:09 PM. Reason: Sold
