who is part of the 37 in tire club..(post pics)
#3911
37" Nitto's on 1.75" front coil spacers and .75" rear coil spacers. Will eventually have 2.5" Metalcloak or RK parts. I did very generous pinch seam cutting in the front and rear of the wheel wells in the back, and can stuff the 37 up to the top of the wheel well and not rub the pinch seams. <img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=630822"/> <img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=630823"/> <img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=630824"/>
Can you post some detailed pics of the trimming?
#3912
JK Enthusiast
I'll try to get some shots of the finished trimming after this weekend if I get a chance to finish it up, for anyone who wonders about that. I haven't seen any good pics/threads of trimming more than a baby amount off the forward pinch seam in the rear, so maybe people will find some better pictures and descriptions useful
#3916
JK Enthusiast
I'd go 4.88 if you daily drive and don't plan on going bigger than 37s. If you crawl a lot and don't care about gas mileage/high revs then maybe 5.13. Don't even look at 5.38s in my opinion for 37s.
I'm running the 3.73s on 3.6 motor with my trail grapplers until I regear and it's totally fine for daily driving.
#3918
JK Enthusiast
#3920