What was done to your JK this week?
In honor of my jeeps three year anniversary I gave it a bath and it's first ever wax. It also got a new inspection sticker. 
11-07-2009 | 07:04 PM
#7034
JK Enthusiast
Joined: Jan 2009
Posts: 263
Likes: 0
From: Dallas, TX
Let me know how the TruckLite LED headlights work for you. I have heard mixed reviews up to this point so hope your experience is a good one.
thanks.
thanks.
So, about to install a $hit-ton of stuff, and will share picts when done, but for now, two simple questions.
When I put on the AEV Snorkel, on a stock hood, should I lose or leave the RUBICON decal on that side of the hood? Does cutting into it look odd? Anyone got picts on this?
Also, I already bent my antenna for my windshield mount KC slimlites, will I be able to bend it again for the snorkel? There must be another solution. Saw a thread about moving the antenna inside, but the photo links are dead. Anyone?
Within the next 2 weeks installing on my otherwise stock 07 Rubicon Unlimited:
AEV Bumper, Skidplate
Warn 9.5ti winch
Custom made 12voltguy JK Pod switch panel
SPAL Radiator Fan upgrade with kill switch for mud/deep water fording
9" IPF 900XS lights (like the AEV site has on the bumper picts)
Trucklite 7" LED Headlights
Fog Light Upgrade TBD
Powdercoated roller fairlead with Delrin rollers
Viking Offroad Synthetic Winch Line
Benchmark Dual Battery Tray with 2 Optima Yellowtops
National Luna Intelligent Split-Charging System w/upgraded solenoid (to add Ready welder later)
Benchmark Evap Skid Plate
Benchmark Oil Pan
and Raising Breathers for Auto Tranny and Transfer as needed.
Hood Lock
Under Hood Light (Quadratec)
STOKED!
When I put on the AEV Snorkel, on a stock hood, should I lose or leave the RUBICON decal on that side of the hood? Does cutting into it look odd? Anyone got picts on this?
Also, I already bent my antenna for my windshield mount KC slimlites, will I be able to bend it again for the snorkel? There must be another solution. Saw a thread about moving the antenna inside, but the photo links are dead. Anyone?
Within the next 2 weeks installing on my otherwise stock 07 Rubicon Unlimited:
AEV Bumper, Skidplate
Warn 9.5ti winch
Custom made 12voltguy JK Pod switch panel
SPAL Radiator Fan upgrade with kill switch for mud/deep water fording
9" IPF 900XS lights (like the AEV site has on the bumper picts)
Trucklite 7" LED Headlights
Fog Light Upgrade TBD
Powdercoated roller fairlead with Delrin rollers
Viking Offroad Synthetic Winch Line
Benchmark Dual Battery Tray with 2 Optima Yellowtops
National Luna Intelligent Split-Charging System w/upgraded solenoid (to add Ready welder later)
Benchmark Evap Skid Plate
Benchmark Oil Pan
and Raising Breathers for Auto Tranny and Transfer as needed.
Hood Lock
Under Hood Light (Quadratec)
STOKED!
11-08-2009 | 09:41 AM
#7036
Sponsoring Vendor
Off Road Evolution Rep
Off Road Evolution Rep
Joined: Feb 2008
Posts: 3,068
Likes: 0
From: Fullerton, Ca.
Installed my new Rock Krawler tie rod.... and got rid of the factory pretzel 
also went to Walker Evans and picked up my new 17x9 all black beadlocks
now it's time to order up my 37's.
also went to Walker Evans and picked up my new 17x9 all black beadlocks
now it's time to order up my 37's.
11-08-2009 | 02:36 PM
#7038
JK Enthusiast
Joined: Oct 2009
Posts: 187
Likes: 0
From: Spring, Texas
11-08-2009 | 06:21 PM
#7039
JK Enthusiast
Joined: Jun 2009
Posts: 181
Likes: 0
From: Orange County, CA
Painted my Antenna Black
