What was done to your JK this week?
JK Newbie
Join Date: Oct 2011
Location: San fransisco ca
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by jkhooligan
What did I do this week? Ripped the fender off on the trail. Ah...it's only a fender. That'll buff right out.
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=251429"/>
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=251429"/>
Away with the press fit, I just grabbed a 16mm X 1.75 knob from summit racing, centered it over the top, then muscled it clockwise until it threaded itself. About as snug as a shift knob gets, but no turning back now, I don't think vise grips could budge this thing off haha. But anything 16mm will fit if you jam it on there
JK Freak
Join Date: Jun 2011
Location: fort wayne, IN
Posts: 733
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by YeepDawg
Away with the press fit, I just grabbed a 16mm X 1.75 knob from summit racing, centered it over the top, then muscled it clockwise until it threaded itself. About as snug as a shift knob gets, but no turning back now, I don't think vise grips could budge this thing off haha. But anything 16mm will fit if you jam it on there
JK Enthusiast
Join Date: Sep 2009
Location: Greenwood, IN
Posts: 394
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Captain Wild Thing
Installed smittybilt fender armor front and rear and a rock hard rear bumper.
JK Enthusiast
Join Date: Jan 2011
Location: Omaha, NE
Posts: 333
Likes: 0
Received 0 Likes
on
0 Posts
This week.. we did This and That
4.88 gears
C Gussets
Axle Sleeves
Draglink Flip
Adjustable rear trackbar
Ten chromoly axles front/rear
1310 Driveshafts front/rear
Exhaust Spacers
4" Teraflex LCG Long Arm Lift
37" Tires
ATX Slab Beadlock wheels
LoD Sliders added (already had LoD front/rear bumpers)
and for good measure trimmed the rear pinch seem
https://www.jk-forum.com/forums/show...-Build-Big-MAK
4.88 gears
C Gussets
Axle Sleeves
Draglink Flip
Adjustable rear trackbar
Ten chromoly axles front/rear
1310 Driveshafts front/rear
Exhaust Spacers
4" Teraflex LCG Long Arm Lift
37" Tires
ATX Slab Beadlock wheels
LoD Sliders added (already had LoD front/rear bumpers)
and for good measure trimmed the rear pinch seem
https://www.jk-forum.com/forums/show...-Build-Big-MAK
JK Super Freak
Join Date: May 2011
Location: North County San Diego, California
Posts: 1,000
Likes: 0
Received 0 Likes
on
0 Posts
Okay so I finally was able to get some pictures tonight!!
Low beams (yellow signs in the back round are about 125 yards away and are slightly up hill
High beams (same spot as first pic)
Just a couple things about these lights compared to stock. First of all there isn't just the point about more light output but the fact about how much more "useful" the light is. Second HIDs lights are significantly more clear and the clarity is amazing in comparison to the stock lights. Yea there is a lot of light and you can piss off some people with the stock housing but using the really simple write up on Project JK to adjust your headlights makes it a no brainer! Especially with the grill off too! I hope this helps and is useful info for some people!!
Nick
Low beams (yellow signs in the back round are about 125 yards away and are slightly up hill
High beams (same spot as first pic)
Just a couple things about these lights compared to stock. First of all there isn't just the point about more light output but the fact about how much more "useful" the light is. Second HIDs lights are significantly more clear and the clarity is amazing in comparison to the stock lights. Yea there is a lot of light and you can piss off some people with the stock housing but using the really simple write up on Project JK to adjust your headlights makes it a no brainer! Especially with the grill off too! I hope this helps and is useful info for some people!!
Nick