Started my 4 Door JK Build!
#1
JK Enthusiast
Thread Starter
Started my 4 Door JK Build!
Hey guys, I've started my JK build. I'll be sure to post plenty of pics.
First off, I ordered all my stuff from Dave at Northridge, what a pleasure. That guy is nothing short of awesome. He gave me incredible service, advice & prices. I highly recommend that if you plan on building your jeep, or just need a few parts, call him first.
Below is what I ordered from Northridge on the 25th of last month.
Currie Rock Jock III Dana 60 rear w/5.38 & Arb lockers
Currie Rock Jock III Dana 60 front w/5.38 & Arb locker
Teraflex 6 inch Long arm lift
Mastercraft grab handles (front & back)
firestick CB antenna
JK LOD Signature Series SHORTY rear bumper with Tire Carrier, bolt in Halogen light kit , Bolt on trail rack, Bolt on 3rd Brake light. In Matt Black
*
Rugged Ridge JK XHD Short Base Front Bumper w/ winch mount
J.E. REEL JK 1350 Drive Shaft HD front and rear
4x 5100 series Billstein shocks
Superchips flashpac
I also ordered a Rubicrawler from Advanced Adaptors
I already have my tires sitting in my Garage, 5x *Irok radials 41x14.5R17
Everything should arrive mid June, Jeep should be on the road by last week of June.
I'm having a little trouble finding rims though, any thoughts or suggestions will be appreciated. I must have beadlocks, but Irok suggests a minimum of 12 inch wide rim, Im having trouble finding a 17x12 inch beadlock rim. I guess the minimum I would push it would be a 10 inch wide rim. I'll post pics of my tires next to stock jeep soon.*
Also, any suggestions on who to fit all this stuff on my jeep when it gets here would be appreciated too, I live in San Fernando Valley California (Los Angeles).
Cheers,
Aaron
*
First off, I ordered all my stuff from Dave at Northridge, what a pleasure. That guy is nothing short of awesome. He gave me incredible service, advice & prices. I highly recommend that if you plan on building your jeep, or just need a few parts, call him first.
Below is what I ordered from Northridge on the 25th of last month.
Currie Rock Jock III Dana 60 rear w/5.38 & Arb lockers
Currie Rock Jock III Dana 60 front w/5.38 & Arb locker
Teraflex 6 inch Long arm lift
Mastercraft grab handles (front & back)
firestick CB antenna
JK LOD Signature Series SHORTY rear bumper with Tire Carrier, bolt in Halogen light kit , Bolt on trail rack, Bolt on 3rd Brake light. In Matt Black
*
Rugged Ridge JK XHD Short Base Front Bumper w/ winch mount
J.E. REEL JK 1350 Drive Shaft HD front and rear
4x 5100 series Billstein shocks
Superchips flashpac
I also ordered a Rubicrawler from Advanced Adaptors
I already have my tires sitting in my Garage, 5x *Irok radials 41x14.5R17
Everything should arrive mid June, Jeep should be on the road by last week of June.
I'm having a little trouble finding rims though, any thoughts or suggestions will be appreciated. I must have beadlocks, but Irok suggests a minimum of 12 inch wide rim, Im having trouble finding a 17x12 inch beadlock rim. I guess the minimum I would push it would be a 10 inch wide rim. I'll post pics of my tires next to stock jeep soon.*
Also, any suggestions on who to fit all this stuff on my jeep when it gets here would be appreciated too, I live in San Fernando Valley California (Los Angeles).
Cheers,
Aaron
*
Trending Topics
#9
Very impressive! I am envious of your build... 17X10 are plenty wide for the 14.5/17 Iroks. My preference would be a 9 wide wheel.
Post pictures as you build. Are you doing all the work?
Post pictures as you build. Are you doing all the work?