Redrock2063 build at Teraflex Plus
#1
JK Enthusiast
Thread Starter
Redrock2063 build at TeraFlex Plus
Here's a picture of my Rubicon as I dropped it off at the TeraFlex Plus shop.
They are going to put on the following for me:
TeraFlex 2.5 long arm lift (3.0 kit with the new 2 door 2.5inch springs.)
TeraFlex speed bumps
TeraFlex Elka Shocks
TeraFlex 2low transfer case gear
Woods Steering Stabilizer relocation bracket
TeraFlex knuckle gussets & sleeves
Expedition One Front bumper
Expedition One Rear bumper
Expedition One Rubi skid
Warn 9.5ti winch
AEV rear corner plates
Rockhard skid plates
Poison Spyder Evap skid plate
Kilby exhaust skid plate
Pure Jeep Rock Sliders
LiteGrip Transmission and Tera 2l Transfer case knobs
For now I'm going to run the stock BFG MT tires and Rubicon wheels. Eventually I'll put on new wheels and 33's. Once I get some miles on and decide what type of wheels to go with, bead lock or not etc.
With the help of Joe from Teraflex and myself we'll be posting up pictures as the build progresses. It's going to be great!
They are going to put on the following for me:
TeraFlex 2.5 long arm lift (3.0 kit with the new 2 door 2.5inch springs.)
TeraFlex speed bumps
TeraFlex Elka Shocks
TeraFlex 2low transfer case gear
Woods Steering Stabilizer relocation bracket
TeraFlex knuckle gussets & sleeves
Expedition One Front bumper
Expedition One Rear bumper
Expedition One Rubi skid
Warn 9.5ti winch
AEV rear corner plates
Rockhard skid plates
Poison Spyder Evap skid plate
Kilby exhaust skid plate
Pure Jeep Rock Sliders
LiteGrip Transmission and Tera 2l Transfer case knobs
For now I'm going to run the stock BFG MT tires and Rubicon wheels. Eventually I'll put on new wheels and 33's. Once I get some miles on and decide what type of wheels to go with, bead lock or not etc.
With the help of Joe from Teraflex and myself we'll be posting up pictures as the build progresses. It's going to be great!
Last edited by StripyMonkey; 04-28-2010 at 12:05 PM. Reason: Incorrect vendor for the Steering Stabilzer bracket
#5
JK Enthusiast
Thread Starter
Thanks. Absolutely I can't wait. I've been daydreaming about buying a Jeep for about 3 years. Seriously planing, saving and talking about building one out for 1 1/2 years. Big thanks to the miles of threads I've read on this form. The guys at Teraflex Joe, Josh, Ben and Carl last year for all the questions and working through what I thought I wanted and what would work best. I wish Joe could rig up a web-cam. But then I'd never get any work done while it is in the shop. Now to sort out the work schedule and get to Moab asap.
#6
Sponsoring Manufacturer
Thanks. Absolutely I can't wait. I've been daydreaming about buying a Jeep for about 3 years. Seriously planing, saving and talking about building one out for 1 1/2 years. Big thanks to the miles of threads I've read on this form. The guys at Teraflex Joe, Josh, Ben and Carl last year for all the questions and working through what I thought I wanted and what would work best. I wish Joe could rig up a web-cam. But then I'd never get any work done while it is in the shop. Now to sort out the work schedule and get to Moab asap.
#7
JK Enthusiast
Thread Starter
Sorry missed the last line. Yes it is brand new, I picked it up on April 7th. Took the next day off from work to put on some basic mods, grill mesh, IPF Northridge headlights, drilled the mirrors, painted the muffler, grab handles etc. I've been driving it around a bit to get a good feel for it, mostly to work. But a bit around some of the dry farms around. Just way to much fun to see the build get going after all the planing/saving.
Trending Topics
#8
JK Enthusiast
Thread Starter
Thanks for you help Joe in filling my need to watch the fun!
#9
Sponsoring Manufacturer
Rear brackets are welded in and spray painted. Front stock brackets and drivers cat removed. The convertor will be welded back in place slightly rotated for better clearance. On 2007-2009 models this step is not needed.