Project-JK's NEW 2012 Dozer JK Unlimited Rubicon - RubiCAT
#182
just ordered the same jeep should be here in dec cant wait to see how you build up yours .this will be my 5th jeep and i can say with confidence probably my best. im not gonna go crazy with mine mild lift and probably 33 ,s.but what would you suggest 3.73,s or 4.10,s its a daily driver so i want to maximize mpg and road worthiness. and still hit some trail.
#183
JK Junkie
just ordered the same jeep should be here in dec cant wait to see how you build up yours .this will be my 5th jeep and i can say with confidence probably my best. im not gonna go crazy with mine mild lift and probably 33 ,s.but what would you suggest 3.73,s or 4.10,s its a daily driver so i want to maximize mpg and road worthiness. and still hit some trail.
#184
JK Newbie
Join Date: Nov 2011
Location: colorado springs
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
updates??? we have the same rig. well sort of. other than the lift and tires I have just been wheeling mine. I need to step up from the 35 mtrs, beating up my skids with the off roading here in colorado. you should bring moby out to RAM off-road park, place is set up for buggies. whole lot of fun in a controlled environment.
#185
updates??? we have the same rig. well sort of. other than the lift and tires I have just been wheeling mine. I need to step up from the 35 mtrs, beating up my skids with the off roading here in colorado. you should bring moby out to RAM off-road park, place is set up for buggies. whole lot of fun in a controlled environment.
#186
JK Newbie
Join Date: Nov 2011
Location: colorado springs
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
nice! with the 3.5 inch lift i have I destroyed the bellows on the front drive shaft. I am considering the AFE pipe that moves the cross over behind the cross member. Also, I have tom woods drive shafts on the short list now.
#187
Was thinking about the same thing for my first mod. Went out with the local jeep club today and the 4 doors were definitely having to scrape over some stuff. Looks great! So what's next?! The wait is killing me!
#188
JK-Forum Founder
Thread Starter
Join Date: Jul 2006
Location: Laguna Niguel, CA
Posts: 36,534
Likes: 0
Received 16 Likes
on
15 Posts
In preparation of a new aftermarket front bumper, we just installed an EVO MFG vacuum pump relocation bracket. This is a MUST HAVE for anyone with a 2012 and planning to install a big winch like a PowerPlant in between the frame rails.
What the 2012 vacuum pump looks like in it's factory location...
Here's what the EVO MFG relocation bracket kit looks like...
Removing the factory bracket...
Reinstalling the vacuum pump on its new relocation bracket...
Ta Da!!
Click on the link below to see a complete write-up with lots of pics to help you out
EVO MFG 2012 JK Vacuum Pump Relocation Bracket Installation Write-Up
What the 2012 vacuum pump looks like in it's factory location...
Here's what the EVO MFG relocation bracket kit looks like...
Removing the factory bracket...
Reinstalling the vacuum pump on its new relocation bracket...
Ta Da!!
Click on the link below to see a complete write-up with lots of pics to help you out
EVO MFG 2012 JK Vacuum Pump Relocation Bracket Installation Write-Up