tvan93

I took some Vht nite shades to my turn signals and put some expanded metal behind my grill. The nite shades was a little dark so I got brighter bulbs so they are completely visible when they are on I took some pics of both processes I can give instructions if any one wants. So here is is what do y'all think?

4fit?

Nice! Thought about doing some VHT on my signals as well.

tvan93

I would definitely recommend it, I love the look

Takenithome

What's vht?

scott0531

Looks great

tvan93

It's a spray on tint

jaynasty10

howd you get the side lights out? ive done my front ones but cant figure the sides out

mkd1993

You can buy it at advance auto parts and i think autozone it's in a purple can and i think it's just called nightshade or something like that

tvan93

I cut the rivet holding it in with bolt cutters. Then inside the fender at the top of the light there is a clip. You have to pinch it and pull the light down as you push the clip outward. You have to pull really hard
It feels like you are gonna break something but it's all fine. It take a little pulling on the inner liner to get it to squeeze out. I also put on a few extra layers I'd clear coat so I didn't scratch the newley painted ones. Then just replace the rivet with a zip tie

Evimero

Great job man! I love the grill! Where did you pick up the mesh?