MY10 JK Sahara Unlimited expedition built - For Borneo challenge 2011
#1
JK Freak
Thread Starter
Join Date: Nov 2010
Location: Brunei - Expat
Posts: 528
Likes: 0
Received 0 Likes
on
0 Posts
MY10 JK Sahara Unlimited expedition built - For Borneo challenge 2011
I had some time spare this afternoon so thought to put my JK modifications in pictures - From stock to ready for Borneo Expedition 2011
New 2010 JK Sahara Unlimited - Oct 2010
Ready for the Borneo Expedition - 28th - 4th of June 2011
First mod was the AEV heat reduction hood + Snorkel (always wanted one)
Then I put the hood latch on so I was able to adjust my AEV hood (prevent it from bouncing)
Next was the K&N air indiction kit + jet stage two chip
Enjoying my mods open top on the beach
Next was the Borla dual tip catback exhaust...nice
Again another wee drive on the beach (Brunei)
Ordered my ARB deluxe fr/rr bumpers ages ago, finally they were installed
Also got my ARB rocksliders installed, slightly tricky as you need to drill them into the chassis
Decided to go for the TF 2.5" coil lift, great choice
Installed my WARN 9.0i Rc synthetic rope winch
A proper switch so I can switch off the power to the winch
Next is WARN HID
Installed 1.5" spidertrax spacers to balance my tires in the arches
Quick trip to Labi road to test my jeep
Finally got my 16" procom wheels and 305x70xR16 Yokohama Geolander tyres
Got my adjustable control arms installed (fr/rr upper & lower)
any takers ?
Installed my heavy duty TF front trackbar
Lift and control arms from the back
Wanted to monitor my engine parameters hence installed Aeroforce interceptor
I needed the best Roofrack for my ARB awning and Series III tent hence installed a MBRP roofrack
Installed my ARB awning + mosquito netting (brilliant)
Needed a fridge to store my beers :-)
Custom made dual fuel tanks on the gate (moving my spare tire to the roof)
Some more posing
Finished my phase I mod's so far......
Best regards,
Mark
New 2010 JK Sahara Unlimited - Oct 2010
Ready for the Borneo Expedition - 28th - 4th of June 2011
First mod was the AEV heat reduction hood + Snorkel (always wanted one)
Then I put the hood latch on so I was able to adjust my AEV hood (prevent it from bouncing)
Next was the K&N air indiction kit + jet stage two chip
Enjoying my mods open top on the beach
Next was the Borla dual tip catback exhaust...nice
Again another wee drive on the beach (Brunei)
Ordered my ARB deluxe fr/rr bumpers ages ago, finally they were installed
Also got my ARB rocksliders installed, slightly tricky as you need to drill them into the chassis
Decided to go for the TF 2.5" coil lift, great choice
Installed my WARN 9.0i Rc synthetic rope winch
A proper switch so I can switch off the power to the winch
Next is WARN HID
Installed 1.5" spidertrax spacers to balance my tires in the arches
Quick trip to Labi road to test my jeep
Finally got my 16" procom wheels and 305x70xR16 Yokohama Geolander tyres
Got my adjustable control arms installed (fr/rr upper & lower)
any takers ?
Installed my heavy duty TF front trackbar
Lift and control arms from the back
Wanted to monitor my engine parameters hence installed Aeroforce interceptor
I needed the best Roofrack for my ARB awning and Series III tent hence installed a MBRP roofrack
Installed my ARB awning + mosquito netting (brilliant)
Needed a fridge to store my beers :-)
Custom made dual fuel tanks on the gate (moving my spare tire to the roof)
Some more posing
Finished my phase I mod's so far......
Best regards,
Mark
Last edited by Markdsv; 06-12-2011 at 05:24 AM.
Trending Topics
#9
JK Newbie
Join Date: Apr 2011
Location: Wasting away again in Margaritaville
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
Credit card companies must love you....that COULDN'T have been cheap.
Incredible rig though..I hope to achieve roughly the same...after the years it'll take me to accumulate all that stuff lol.
I'm really digging those bumpers too. Nice job man!
Incredible rig though..I hope to achieve roughly the same...after the years it'll take me to accumulate all that stuff lol.
I'm really digging those bumpers too. Nice job man!
#10
JK Freak
Thread Starter
Join Date: Nov 2010
Location: Brunei - Expat
Posts: 528
Likes: 0
Received 0 Likes
on
0 Posts
Thankts
Hi Guys, thanks for the comments, indeed my CC company loves me or is it Quadratec.....think I am on order number 42 as we speak.....or it is customs as I need to pay 20% import duty over anything remotely to do with cars
Phase II will be 4" lift, 35" tires, ARB fr/rr lockers, need new shocks as well...bo bo bo just got ELKA's but for a 2.5" lift and I am thinking about RIPP. Again if i don't spend it wifie does
Phase II will be 4" lift, 35" tires, ARB fr/rr lockers, need new shocks as well...bo bo bo just got ELKA's but for a 2.5" lift and I am thinking about RIPP. Again if i don't spend it wifie does