My fender cut
#1
JK Newbie
Thread Starter
Join Date: Feb 2012
Location: sullivan county ny
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
My fender cut
I started by tape ping ,then I cut with out removing anything.trimmed everything down.smooth out corners.installed door trim with heat gun n glued skeleton to fender(so there's no flapping).i have new wheels being installed tomm.
#6
JK Newbie
Thread Starter
Join Date: Feb 2012
Location: sullivan county ny
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
I did cut them on the jeep.the only things that were taking out was cut.using the multi power tool made it easy.i didn't need anyone to hold anything because I never remove anything to make it loose.the first thing I did was tape then cut along the tape line,ones that was done I cut the plastic clips n it comes almost all out.then you have to disconnect the marker n pull the light out.then you can see that all you have to do is a little trimming.