home made evap skid
#3
JK Enthusiast
Join Date: Dec 2010
Location: N.E. Georgia
Posts: 208
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Crush jk83
looks good. i hope the stock skid will hold up well enough.
#5
JK Newbie
Join Date: Aug 2007
Location: Maricopa, Arizona
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by dhubers
Got my evap skid all done & put on. Now to see will do the job.
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=287954"/>
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=287953"/>
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=287954"/>
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=287953"/>
Trending Topics
#8
JK Enthusiast
Join Date: Feb 2012
Location: West Haverstraw, New York
Posts: 483
Likes: 0
Received 0 Likes
on
0 Posts
Nice 1
Good job I did the same thing and made my own, I always feel better making my own stuff when I can.
Attachment 290923
Attachment 290923
I curious to know how it was mounted....did you
put tabs on it to mount to the frame? or is it
mounted to the underside of the body-tub....
#9
JK Enthusiast
I used the same mounting points as the canister mount but I have tabs coming off of the skid. The front tab is actually boxed in and thats why there are the two holes in the front of the skid, so I can get a socket in there to unbolt it. I made the holes a little too big, but live and learn. The rear tab is an L-shaped bracket and it is reinforced so there is no side to side movement. It's all coated in Rhinoliner, which seems to be holding up pretty well and the other holes you see in the bottom are just for draining.. I have some pictures of the top end of the skid somewhere, I'll see if I can dig them up.
Last edited by Friday2322; 03-19-2012 at 11:05 AM. Reason: add picture
#10
JK Enthusiast
I used the same mounting points as the canister mount but I have tabs coming off of the skid. The front tab is actually boxed in and thats why there are the two holes in the front of the skid, so I can get a socket in there to unbolt it. I made the holes a little too big, but live and learn. The rear tab is an L-shaped bracket and it is reinforced so there is no side to side movement. It's all coated in Rhinoliner, which seems to be holding up pretty well and the other holes you see in the bottom are just for draining.. I have some pictures of the top end of the skid somewhere, I'll see if I can dig them up.