Flush mount tail lights are finally out.
10-23-2013, 12:15 AM
#1
Former Member
Thread Starter
Join Date: Aug 2012
Location: Oceanside - san diego, Ca.
Posts: 1,748
Likes: 0
Received 1 Like
on
1 Post
Flush mount tail lights are finally out.
So I have the lights designed and ready to go its been a while I've been slammed with other stuff but finaly managed to get the set up together.
Lights are like the design I did last year with a change to reverse light. Found a 2" wasn't real happy with it. I'll keep looking for a larger light as a option but I did find single 3 watt weather proof focused beam with light scatter...makes backing up on the trail easier as its like 2 bright led flashlights back there with good focus and light scatter for surrounding lighting.
The brake/stop/turn is a 4" submersible like the original design.
The big change is I opted for aluminum versus the 16gauge steel as its ALLOT lighter and with the curve it adds strength through Shape....so win win.
Options are a resistor that will slow the fast flash down to normal, I have the resistors in stock as well.
Kit comes with 6 pan head allen bolts and nyloc nuts, 2 4" LEDs, 2 focused 3 watt reverse lights, 2 plates, 2 rubber grommets and template for mounting.
$175 shipped conus
Got tired of this too many times to count
Lights are like the design I did last year with a change to reverse light. Found a 2" wasn't real happy with it. I'll keep looking for a larger light as a option but I did find single 3 watt weather proof focused beam with light scatter...makes backing up on the trail easier as its like 2 bright led flashlights back there with good focus and light scatter for surrounding lighting.
The brake/stop/turn is a 4" submersible like the original design.
The big change is I opted for aluminum versus the 16gauge steel as its ALLOT lighter and with the curve it adds strength through Shape....so win win.
Options are a resistor that will slow the fast flash down to normal, I have the resistors in stock as well.
Kit comes with 6 pan head allen bolts and nyloc nuts, 2 4" LEDs, 2 focused 3 watt reverse lights, 2 plates, 2 rubber grommets and template for mounting.
$175 shipped conus
Got tired of this too many times to count
10-23-2013, 06:19 AM
#6
Former Member
Thread Starter
Join Date: Aug 2012
Location: Oceanside - san diego, Ca.
Posts: 1,748
Likes: 0
Received 1 Like
on
1 Post
Yes I'll ship to Canada for ya. sent a ton of my old dh bike parts north of the border..
That's a option I need to post thanks, the standard kit will require relocation of license plate most have carriers etc and relocated the plate... the base option is 3/4" shorter and will work fine with it.
sent a ton of my old dh bike parts north of the border..That's a option I need to post thanks, the standard kit will require relocation of license plate most have carriers etc and relocated the plate... the base option is 3/4" shorter and will work fine with it.
Trending Topics
10-23-2013, 08:10 AM
#8
JK Jedi
Yes I'll ship to Canada for ya. sent a ton of my old dh bike parts north of the border..
That's a option I need to post thanks, the standard kit will require relocation of license plate most have carriers etc and relocated the plate... the base option is 3/4" shorter and will work fine with it.
sent a ton of my old dh bike parts north of the border..That's a option I need to post thanks, the standard kit will require relocation of license plate most have carriers etc and relocated the plate... the base option is 3/4" shorter and will work fine with it.
Sent from my obama listening device
10-23-2013, 08:14 AM
#9
JK Enthusiast
Join Date: Sep 2011
Location: Indio, CA
Posts: 258
Likes: 0
Received 0 Likes
on
0 Posts
Please post a pic of what it will look like with licence plate being 3/4" lower. I don't want to relocate the plate. Would also like to see an example of what it looks like with a normal bumper and carrier. Looks promising, may be just the set up I'm looking for.....
