Finally, AEV Hood Install
#13
JK Super Freak
Join Date: Jun 2007
Location: MD DC area
Posts: 1,461
Likes: 0
Received 0 Likes
on
0 Posts
Hood is a very easy install, very easy. The fit was right on with the AEV Hood, did'nt need to make any adjustments at all.
Just unbolt your stock hood: First disconnect the ground strap over by the batterey, next un-plug your hose for the winsheild cleaner, then take off your front latch and spring.
Close hood: you will need a #45 Torx bite to re-move the bolts from the hood hinges. after takeing off the bolts for the hinge, just lift the hood off.
To install new AEV Hood just reverse steps........
Just unbolt your stock hood: First disconnect the ground strap over by the batterey, next un-plug your hose for the winsheild cleaner, then take off your front latch and spring.
Close hood: you will need a #45 Torx bite to re-move the bolts from the hood hinges. after takeing off the bolts for the hinge, just lift the hood off.
To install new AEV Hood just reverse steps........
Awesome, hopefully I can get the guy who's painting it to give me a hand real quick and get it on there. Sounds like it's a 10-15 min project.
#14
JK Super Freak
Thread Starter