Custom modular JK hardtop
#1351
This morning I installed a pair of cardboard mockup flat fenders on the JK to check fit, shape and proportions. The fiberglass mounting flange is longer in the front and in the wheel arch than the final fenders will be, I've left it long for making the mold.
I plan to start making the mold masters tomorrow so if you have any suggestions for improvement of the size, shape or proportions of these cardboard mockups please let me know.
I plan to start making the mold masters tomorrow so if you have any suggestions for improvement of the size, shape or proportions of these cardboard mockups please let me know.
#1352
It's hard to make an aesthetic judgement with the stock rear fender on....but at first glance the hard edge/angle of the rear of the flat fender is jarring.
The whole JK is just so curvy all-over that having that hard edged down-angle?
Dunno, it just doesn't look right to me.
Personally I'd like to see a curve at the top rear of the fender, a Photoshop or something just to see.
Then again when the rear fender matches, it might all make sense and "flow" together.
As always, your work is fantastic.
The whole JK is just so curvy all-over that having that hard edged down-angle?
Dunno, it just doesn't look right to me.
Personally I'd like to see a curve at the top rear of the fender, a Photoshop or something just to see.
Then again when the rear fender matches, it might all make sense and "flow" together.
As always, your work is fantastic.
#1353
It's hard to make an aesthetic judgement with the stock rear fender on....but at first glance the hard edge/angle of the rear of the flat fender is jarring.
The whole JK is just so curvy all-over that having that hard edged down-angle?
Dunno, it just doesn't look right to me.
Personally I'd like to see a curve at the top rear of the fender, a Photoshop or something just to see.
Then again when the rear fender matches, it might all make sense and "flow" together.
As always, your work is fantastic.
The whole JK is just so curvy all-over that having that hard edged down-angle?
Dunno, it just doesn't look right to me.
Personally I'd like to see a curve at the top rear of the fender, a Photoshop or something just to see.
Then again when the rear fender matches, it might all make sense and "flow" together.
As always, your work is fantastic.
I believe when the edges are softened as above and the rears are in place too, everything will look right. This concept sketch does show some rounding at the rear corner:
#1356
Looks seriously nice; I've held off on buying flares or cutting mine, I just haven't liked the lines I've seen in other flares. These with plastic tree installation (so they rip off instead of twisting the jeep skin) would be my ideal setup. I love that old school look.
#1357
High praise indeed coming from someone with a Willys flatfender as his avatar .
Thank you.
I am planning on two methods of installation - bolt on, or break-away/pull out plastic fasteners. Will have to do some testing to find the most suitable plastic fasteners - something secure enough not to worry about in daily driving, but quick-enough to break away on contact with a trail obstacle. Also planning for the marker light wiring to be break-away.
Definitely going for the old school flatfender look - if I can't make people like Four Low happy with the looks of these then I haven't achieved my goal .
I am planning on two methods of installation - bolt on, or break-away/pull out plastic fasteners. Will have to do some testing to find the most suitable plastic fasteners - something secure enough not to worry about in daily driving, but quick-enough to break away on contact with a trail obstacle. Also planning for the marker light wiring to be break-away.
Definitely going for the old school flatfender look - if I can't make people like Four Low happy with the looks of these then I haven't achieved my goal .
#1358
I'm told the first production run of Tactical Spare Covers is now underway. The colors for the first run will be black, "Coyote 498" and Olive Drab. It took longer than expected to start the production because it took a while to source the right Coyote at the right price. Apparently there have been several "official" shades of Coyote used by the military; some are known as Coyote Brown, some as tan, and the shades are all over the place from different suppliers. The current milspec color is called Coyote 498; finding Coyote 498 at a good price took some time, but it's done and everything's in the sewing company's hands now (the sewing company is in Indiana, so these will be U.S.-made). The company tells me the retail price will be $99.99. They don't have an availability date yet, but hopefully they'll be ready in time for the Easter Jeep Safari Vendor Expo in 5 weeks.
#1360
I'm told the first production run of Tactical Spare Covers is now underway. The colors for the first run will be black, "Coyote 498" and Olive Drab. It took longer than expected to start the production because it took a while to source the right Coyote at the right price. Apparently there have been several "official" shades of Coyote used by the military; some are known as Coyote Brown, some as tan, and the shades are all over the place from different suppliers. The current milspec color is called Coyote 498; finding Coyote 498 at a good price took some time, but it's done and everything's in the sewing company's hands now (the sewing company is in Indiana, so these will be U.S.-made). The company tells me the retail price will be $99.99. They don't have an availability date yet, but hopefully they'll be ready in time for the Easter Jeep Safari Vendor Expo in 5 weeks.
"Ex Umbris Venimus"