6 inch lift with 37s pics please
#1
JK Newbie
Thread Starter
Join Date: Jul 2015
Location: idaho
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
6 inch lift with 37s pics please
I'm planning on 6 inch lift teraflex and yes I know it cost alot money go that big axles gears driveshafts but in future id like 38s so if have any with 37s thay be cool I'd just like see what it look like 37s and yess have rubicon danna 44s for now
#2
That's going to be HUGE! Here's my JKURX on a Teraflex 3.5 with 37's, full flares and it's been wheeled a handful of times with this setup. Have a slight rub at full flex, in the rear, it just touches the inner liner on the forward side. I trimmed my rails and air down to 12 lbs.
I do have adjustable arms installed and a set of driveshafts ready to install. I run this on my 44's with an Artec truss and gusset kit. You'll likely be able to go to 40's with 6" of lift, 38's or 37's with the TF 4".
I do have adjustable arms installed and a set of driveshafts ready to install. I run this on my 44's with an Artec truss and gusset kit. You'll likely be able to go to 40's with 6" of lift, 38's or 37's with the TF 4".