2.5" TF lift (going up?)
#1
JK Enthusiast
Thread Starter
Join Date: May 2009
Location: West Grove, PA.
Posts: 294
Likes: 0
Received 0 Likes
on
0 Posts
2.5" TF lift (going up?)
(7:42 am) Today I begin my journey upwards. 2.5" Teraflex coil lift w/extenders. I hope it is as easy as all of you make it out to be. I've been reading all of the posts and write up's since april when I got my jeep. I will probably have 1001 questions as I progress. As long as the kids leave me alone today I hope to finish with no problems. I will take pix and measurements to make sure I put it back togeather properly.
If anyone has any do's and dont's. Plaese chime in.
coffee
smokes
beer
leftover pizza should be all
I need from what I've gathered through the posts on this subject.
Wish me luck......I'm going in.
If anyone has any do's and dont's. Plaese chime in.
coffee
smokes
beer
leftover pizza should be all
I need from what I've gathered through the posts on this subject.
Wish me luck......I'm going in.
#6
JK Enthusiast
Join Date: Mar 2009
Location: Saint Louis, Missouri
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#8
JK Enthusiast
Thread Starter
Join Date: May 2009
Location: West Grove, PA.
Posts: 294
Likes: 0
Received 0 Likes
on
0 Posts
Back is done, but I need to turn the jeep around so I get the front into the garage... When I set the rear down should I torque the rear control arm bolts since the rear is done? And then move and do the front.