15" Wheel Club
#51
JK Enthusiast
Join Date: Jan 2011
Location: Granby, Québec
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
Really llike your wheels/tires setup.. bumper also. Nice rig!
My 7069 16x8 are on way to home and I start to regret my choice... to many wheels.
Already have 4 265/75/16 km2 almost new at home from my previous pick-up to put on my brand new 2011 JKU sahara. That's why i went with 16x8. Will look for some 15x10 when I get a lift and go with 35 or 37. Hope procomp will make 15x10 in 7069 flat black with bolt pattern 5x5 at this time.
but have to agree your 8069 gloss black look really good!
My 7069 16x8 are on way to home and I start to regret my choice... to many wheels.
Already have 4 265/75/16 km2 almost new at home from my previous pick-up to put on my brand new 2011 JKU sahara. That's why i went with 16x8. Will look for some 15x10 when I get a lift and go with 35 or 37. Hope procomp will make 15x10 in 7069 flat black with bolt pattern 5x5 at this time.
but have to agree your 8069 gloss black look really good!
#56
JK Enthusiast
Join Date: Feb 2008
Location: Jasper, AL
Posts: 243
Likes: 0
Received 0 Likes
on
0 Posts
15x8 Pro Comp 97's. 33x12.50x15 BFG MT's. Had these on two JK's and no rubbing on either. Room for stick-on weights inside as well. They were black on my 2 dr, painted them gray for the new JKU.
#59
15" x 8" US Wheel Black Crawlers with 4.00" BS, and Federal Couragia MT 33" x 12.50". I got them as a package from Desert Rat.
All wheels cleared the calipers except the front driver side Had to get out the Dremel and a good file. Mine rubbed on the face of the caliper, the diameter of the calipers was not an issue anywhere, even with the weights mounted on the inside.
I recycled the center caps from my stock 16" steelies with a little assist from the Krylon company.
Jason
All wheels cleared the calipers except the front driver side Had to get out the Dremel and a good file. Mine rubbed on the face of the caliper, the diameter of the calipers was not an issue anywhere, even with the weights mounted on the inside.
I recycled the center caps from my stock 16" steelies with a little assist from the Krylon company.
Jason