'11 Black Sahara Build Thread
03-29-2012, 09:56 AM
#1
JK Freak
Thread Starter
Join Date: Dec 2011
Location: Auburn, AL and D.C
Posts: 667
Likes: 0
Received 0 Likes
on
0 Posts
A Jeep Story
Most updated pictures are at the end of thread
Hey all. I'll be getting my lift, tires, and wheels within a week, so I figured I'd start my build thread while I was still stock.
My current list for mods to be done:
[X] Poison Spyder Brawler Lite
[X] Superwinch EPi 9.0 Winch (Replaced by Smittybilt X20 10K winch)
[X] Bushwacker Flat Fenders -REMOVED
[X] RK 2.5" Flex lift and bilstein 5100s
[X] 35x12.50x17 Nitto Trail Grapplers with 17" Level 8 strikes
[X] Evo Sliders
[X] Hi-jack Lift
[X] Or-Fab tire carrier -REMOVED
[X] Unplanned purchase of dually D2s
[X] Poison Spyder Hood Louver
It seems I'm out of mods to do!
Time for a new list
[X] DynoMax Exhaust
[X] Body Armor Trail Doors
[X] Trek Armor Seat Covers
[X] Light Force 170s on windshield
[X] Poison Spyder Evap Skid
[X] Wheel Spacers (front wheels rubbing CAs)
[X] Truck-Lites
[X] Poison Spyder Diff Covers
[X] EVO Builder Corners
[X] EVO Tire Carrier
[X] Poison Spyder Narrow Flares
[ ] Poly Weld-in Cage
[ ] Rock Hard Bolt-in Cage
[ ] 37" Pitbull Rockers
[ ] Genright Stinger Front Bumper
[ ] Finish out suspension(CAs, taller springs, drag link flip)
Hey all. I'll be getting my lift, tires, and wheels within a week, so I figured I'd start my build thread while I was still stock.
My current list for mods to be done:
[X] Poison Spyder Brawler Lite
[X] Superwinch EPi 9.0 Winch (Replaced by Smittybilt X20 10K winch)
[X] Bushwacker Flat Fenders -REMOVED
[X] RK 2.5" Flex lift and bilstein 5100s
[X] 35x12.50x17 Nitto Trail Grapplers with 17" Level 8 strikes
[X] Evo Sliders
[X] Hi-jack Lift
[X] Or-Fab tire carrier -REMOVED
[X] Unplanned purchase of dually D2s
[X] Poison Spyder Hood Louver
It seems I'm out of mods to do!
Time for a new list
[X] DynoMax Exhaust
[X] Body Armor Trail Doors
[X] Trek Armor Seat Covers
[X] Light Force 170s on windshield
[X] Poison Spyder Evap Skid
[X] Wheel Spacers (front wheels rubbing CAs)
[X] Truck-Lites
[X] Poison Spyder Diff Covers
[X] EVO Builder Corners
[X] EVO Tire Carrier
[X] Poison Spyder Narrow Flares
[ ] Poly Weld-in Cage
[ ] Rock Hard Bolt-in Cage
[ ] 37" Pitbull Rockers
[ ] Genright Stinger Front Bumper
[ ] Finish out suspension(CAs, taller springs, drag link flip)
Last edited by echoshotz; 12-24-2013 at 01:51 PM. Reason: update
Trending Topics
04-02-2012, 06:28 PM
#8
JK Freak
Thread Starter
Join Date: Dec 2011
Location: Auburn, AL and D.C
Posts: 667
Likes: 0
Received 0 Likes
on
0 Posts
I got some gutter guard plastic mesh from home depot, spray painted it red 3 coats and clear coated once. stuck some siptie holders to the back of the grill with epoxy ( not going anywhere for a while) and ziptied the guard down. The paint has actually held up nicely. Im wondering if I should switch it to silver though. 
04-02-2012, 06:34 PM
#10
JK Freak
Thread Starter
Join Date: Dec 2011
Location: Auburn, AL and D.C
Posts: 667
Likes: 0
Received 0 Likes
on
0 Posts
Thanks! It was sorta difficult not being able to take the grill off (MBRP light bar in the way) but it was worth it i guess. Any excuse to be working on the jeep.