Captianjack2010

I just installed a superwinch S9000 winch and was wondering if anyone has used a Stancor 586-902 solenoid to isolate the winch power at the battery. It is rated at 200amp continuous with a 600amp inrush rating. I plan on installing a switch to control the solenoid on the dash.


The 586-902 is about $55.00 from Newark electronics

I've looked on other threads about using starter solenoids but there are not rated for continuous duty.

This is the link for the solenoid http://www.stancor.com/pdfs/Catalog_2006/Pg_056_57.pdf.

SiliconTi

Warn sells a kit too, but this one looks much better.Thanks for the post.

Captianjack2010

SiliconTi,
I installed the Solenoid and a switch to turn it on and off. See pics below.