ohio79

Looking at getting a new bumper that doesnt have cutouts for factory fogs but has tabs for aftermarket. Looking to see what some of you have replaced yours with and if you ran them off the factory wiring. Im not wanting to go with high watt lights more of a oem type replacment due to overload of the factory wiring

MotoJeeper

I did the same thing with mine. I got Inspired Engineering 6cubes. They are 18 watt. Their other lights are 16w. They come as a plug and play too. If you don't want led, I believe it's 2011 or 2012+ have 24 watt fogs and the older ones have 50 watt, but you could wire a separate harness with a relay that is triggered by the factory fog harness.

Goeagles88

I just bought a set of cheap plug and play replacement LED bulbs on eBay. Much brighter than stock and cost me $25.

budmanm3

Went with the inspired engineering revolvers, plug and play direct to factory location and wiring.

ohio79

Where did you go thru for the inspired engineering ones and did you notice much difference in the briteness

budmanm3

Direct from Sami @inspired and yes these LEDS are super bright. Match perfectly with my truck lites.

John_fender

Also with Inspired Engineering Revolvers in LOD Armorlite bumper. I have them wired to be always on (ignition
activated)

BuckLisa

I got the inspired engineering revolvers. They are awesome! Veteran owned company!

Chemlight

Ran my expedition one bumper that has factory cutouts with an inspired engineering fog light set that hooks directly into factory wiring. Plus one for this company. Top notch.

pazitive44

can you PM me the Link for those lights ??