THINKING ABOUT HELLA 500 driving lamps/olympic4x4 winshield mounts/daystarlowerdash
#1
JK Freak
Thread Starter
Join Date: Sep 2010
Location: Big Swamp, NC
Posts: 519
Likes: 0
Received 0 Likes
on
0 Posts
THINKING ABOUT HELLA 500 driving lamps/olympic4x4 winshield mounts/daystarlowerdash
thinking of ordering the hell 500 driving lamps, might go with the black magic, but I'd like to hear some input from anybody running these. I plan on the olympic 4x4 windshield mounts and the daystar lower dash switch panel. Any suggestions, reviews, or tips would be appreciated.
ohh bonus question: What about running these off the stock battery? should I upgrade or does the stock battery hold up ok?
ohh bonus question: What about running these off the stock battery? should I upgrade or does the stock battery hold up ok?
#3
JK Freak
HAVE THE HELLAs ON MY BUMPER WIRED IT TO THE STOCK FOGLIGHT WIRES WORKS FINE BUT HAVE THE SIX PACK DRY CELL BATTERY WITH 12V RELAY FOR THE HELLAs...u should b ok with stock battery...
#4
JK Enthusiast
ive been running the black magics for about the month and i love them. They look amazing with my theme. Their pretty bright, brighter then the stock headlights. Pretty easy wiring, ditched their lame switch and bought a cool one with the switch gaurd for 10 bux at autozone. Off Road Wherhouse has them for a good price with the KC brackets.
https://www.jk-forum.com/forums/show...hipping-139.99
oh and i use the stock battery and it hasnt crapped out on me yet
https://www.jk-forum.com/forums/show...hipping-139.99
oh and i use the stock battery and it hasnt crapped out on me yet
Last edited by ericsurfffs; 09-28-2010 at 10:06 PM.
#5
JK Newbie
Join Date: May 2009
Location: Rochester, NY
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
Just installed 2 hella 500 black magic ldriving lights last night onto my MBRP front light bar. installation isn't too difficult but i do reccommend buying a new switch and forgetting about the daystar rocker panel if you have a 6 speed manual. shifting into 1st 3rd or 5th starts turning lights on and off due to interferance with the shift lever boot.
#7
JK Enthusiast
Join Date: Mar 2009
Location: College Station & Arlington, Tx
Posts: 454
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#8
JK Junkie
Something else to think about! Some people do not like the light pattern from a driving beam mounted on the windshield mounts. I would think that you would get more hood glare than you would from a long range / spot beam. Also, most lighting specs recomend that a driving beam be located closer to the headlight level. Higher is not necessarily better for this type of beam pattern.
#9
JK Enthusiast
Just installed 2 hella 500 black magic ldriving lights last night onto my MBRP front light bar. installation isn't too difficult but i do reccommend buying a new switch and forgetting about the daystar rocker panel if you have a 6 speed manual. shifting into 1st 3rd or 5th starts turning lights on and off due to interferance with the shift lever boot.
#10
JK Enthusiast
Join Date: Aug 2009
Location: Dublin, OH
Posts: 277
Likes: 0
Received 0 Likes
on
0 Posts
I have a set of the black magics on smittybilt windshield brackets. I replaced the switch with one from radio shack - can't use the daystar since mine is a 6 speed. Happy with the lights - they look great on my black JK. The smittybilt brackets tuck the lights down and out.
No photos yet but will add some soon
No photos yet but will add some soon