I recently purchased a Dana 44 rear axle from an 08 Rubicon to replace the high geared rear end in my 07 X. The addition of the electrical locker an added bonus.
There are two electrical connectors on the Rubi axle, which one is for the electric locker?
Also where can if find the connector that match whatever connection it is?

 

The upper connector is the coil.
The lower connector is the indicator switch.

What ratio did your '07 come with?

Did you get a front axle too, or just gears?

 

Thanks for the response, I appreciate it.
It has the stock 4.10 gears and that is fine for our use.
Plan on just re-gearing the front Dana 30. Man those are expensive gears.
Since we tow this behind our motor home and use it to get places most people don't see we also need to keep it street-able for the bulk of driving.

 

Oops, the 07 came with 3.21 gears, just to high with the 33" tires. Rarely able to use 6th gear and won't back up an incline in 2H.