whisperingpine

I致e had this thing for a few years and just now getting around to installing but I知 not sure where I知 going wrong. I知 getting voltage to the switch pod but there is no power to the pod itself (battery voltage meter not coming on)

any suggestions on what to troubleshoot next?

Sandau

The smaller red wire coming out of the (+) battery connection. What do you have it wired to?

whisperingpine

The fuse wire? It痴 going to M7

Sandau

Is it getting power when key is on?

Sandau

Do you have the inline circuit breaker?

whisperingpine

getting voltage when the key is on, no power to the switch pod

Sandau

With the key on, check for power here

whisperingpine

Not getting anything

resharp001

So I'm not familiar with this particular unit. I suppose those are lights on top that illuminate when the specific circuit is "on"? You're getting power to the with the key on. Have you tried to hook up an accessory to one of the switches and activate that accessory, or are you just thinking there's no power there cuz the lights are not illuminating? What are you using to trigger the relays which would then activate 12v to that circuit? I ask cuz it does not look like you have any wiring going to any of the circuits. I guess you're flipping the switch and then testing the red/black contacts that your accessory would go to?


****ah, I just pulled the product up and I see what you're saying now. At the very least you should be getting a voltage readout on that cover and on the cabin display. This seems like it would have to be an issue on the circuit board there.

Sandau

The fuse is only protecting the M7 circuit. You need to add a fuse into the second slot of that fuse holder.