Prototype projector headlight
#11
JK Enthusiast
Thread Starter
Join Date: May 2009
Location: NC
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, it's built in to the projector itself - the shield moves via solenoid.
#13
JK Enthusiast
Join Date: Jun 2009
Location: Boston, MA
Posts: 162
Likes: 0
Received 0 Likes
on
0 Posts
Here's a couple pics with it on the rig. It reminds me of terminator - now only if the projector beam was red!
Attachment 69645Attachment 69646
Attachment 69645Attachment 69646
You can get the projector to look red (or any color) by painting the front of the shield red.
#14
JK Enthusiast
Thread Starter
Join Date: May 2009
Location: NC
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
It's aftermarket projector
#15
JK Enthusiast
Join Date: Jun 2009
Location: Boston, MA
Posts: 162
Likes: 0
Received 0 Likes
on
0 Posts
#16
Former Member
Join Date: May 2007
Location: Long Island, NY
Posts: 261
Likes: 0
Received 0 Likes
on
0 Posts
#19
JK Enthusiast
Thread Starter
Join Date: May 2009
Location: NC
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
Almost there.. Both projector shields have been painted red - unfortunately the lenses only appear red at some angles when off, but its still neat at the right angle.
What's left is finishing up the backs to keep out water/dust and then aiming them on the rig, and of course, pics.
What's left is finishing up the backs to keep out water/dust and then aiming them on the rig, and of course, pics.
#20
JK Enthusiast
Thread Starter
Join Date: May 2009
Location: NC
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
Long delay, life happens.
Here's pics of the finished lights on the rig. One with the lights off (you can somewhat see the red shield for a terminator look) and one with the lights on. The cutoff is awesome and I've never been flashed, since they are properly aimed. Next step is to take pics of the beam pattern, but here is some eye candy.
Here's pics of the finished lights on the rig. One with the lights off (you can somewhat see the red shield for a terminator look) and one with the lights on. The cutoff is awesome and I've never been flashed, since they are properly aimed. Next step is to take pics of the beam pattern, but here is some eye candy.