Ok... Confession time! Who is using LED Offroad lights from Ebay?
HUMMMM... Just my 2 cents.
01-23-2014, 04:29 PM
#54
JK Newbie
Join Date: Aug 2013
Location: Ypsilanti, MI
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
I won the bid for 20" bar (shipping out from California) past Sunday and got the track# but shipment didnt reached the UPS office yet. it looks like, shipment is from China. Keeping my fingers crossed, little nerves!!! hope i'll get it soon.
02-09-2014, 04:35 AM
#56
The quality of the harness wiring is a valid concern. Some trailer wiring harnesses I purchased from HF wires were so thin, they actually seemed to "dissolve" very strange. I immediately went to NAPA and got a real harness. There is nothing more frustrating then to spend hours doing a nice, neat wiring job, only to need to do it over again. Also, no matter what you wire, be sure you fuse your wiring as close to the battery as possible with the best/closest rated fuse for your aux setup, be they lights, winches or whatever
04-02-2014, 05:31 PM
#57
JK Newbie
Join Date: Mar 2014
Location: Hagerman, NM
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Feniex worklights
https://www.youtube.com/watch?v=T6DjFGl060U
Here is my old review of Feniex brand (made in Austin Tx.) this was made when I had both the 200 and the 1000 work lights installed on my Ranger.
Still working on a mount for the 1000. It is 35" long and about 1 inch tall. Any ideas?
Still working on a mount for the 1000. It is 35" long and about 1 inch tall. Any ideas?
04-03-2014, 01:22 PM
#58
JK Enthusiast
Join Date: Aug 2013
Location: Greenbrier, Arkansas
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
As of right now, I've got Totron lights on my pillars (6 CREE LEDs per light) and I have 4 50" Totron lights sitting in my living room waiting for me to get home to install one. Did not really need 4 of them, but I got a good deal from a guy going out of business locally so I bought them all and figured I'd sell them when I get around to it. I'll post pictures of the 50" when I get home and get everything installed to my sPOD.
04-03-2014, 03:16 PM
#59
JK Newbie
Join Date: May 2013
Location: Florida
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
I bought the tuff LEDs from amazon and love them. I bought 4 6in led bars for around $250 I believe. The quality of them and the harness is great in my opinion (equal if not better than my Rugged Ridge lights).
Last edited by WhiteUnlimitedJK13; 03-29-2015 at 08:18 PM.
