JeepNDad

Ok guys I need your expertise. I have a new Rugged Ridge XHD front bumper and I want to install the Pilot driving lights in it. My problem is I DIDN'T have the factory fog lights so therefore no wiring harness to splice into it. What and how would I go about making this happen???? Any and all help would be much appreciated. Thanks

Ryan0260

Did the lights you buy come with wiring, a relay, and a switch? The only thing you need to tap is power for the switch.

Jersey_Devil

If not goto any auto parts store and get an "accessories relay" an in line fuse, some wire and a switch. The back off the relay box will have wiring instructions

Jersey_Devil

Here's what i use

JeepNDad

This is what I am looking at from AutoZone. Looks like it has everything needed but doesn't mention a relay and. A wondering if they will mount up because like I said earlier I didn't have original fog lights in my stock bumper

Pilot Automotive/2 pcs. 55 Watts 12 Volts halogen driving light
Price: $39.99

JeepNDad

Anybody else have any ideas????

TJM12

The light kit should have all wiring and relay, as well as a switch. Although for forty bucks its hard to say. If you can swing it, I would go with something a little better.