Lights on XHD Bumper??
#1
JK Freak
Thread Starter
Join Date: Jul 2011
Location: Atlanta, GA
Posts: 501
Likes: 0
Received 0 Likes
on
0 Posts
Lights on XHD Bumper??
I wanted to see what kind of light setups people have installed on their Rugged Ridge XHD bumpers. I'm leaning towards doing an 8" rigid industries light bar somewhere.
Pics or ideas welcomed!!
Pics or ideas welcomed!!
#3
JK Junkie
are the holes in your bumper the same size as the factory fog lights?
if they are you can most likely use the BDF bracket and put some rigid dually 1's or 2's into those holes
matthew
if they are you can most likely use the BDF bracket and put some rigid dually 1's or 2's into those holes
matthew
#5
JK Freak
Thread Starter
Join Date: Jul 2011
Location: Atlanta, GA
Posts: 501
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Matthewd5
are the holes in your bumper the same size as the factory fog lights?
if they are you can most likely use the BDF bracket and put some rigid dually 1's or 2's into those holes
matthew
if they are you can most likely use the BDF bracket and put some rigid dually 1's or 2's into those holes
matthew
#6
JK Junkie
nice looking jeeps guys/gals
mine is still 99% stock
been focusing on lighting first and then i'm putting a set of evo skid plates underneath and then onto better tires
matthew
#7
JK Freak
Thread Starter
Join Date: Jul 2011
Location: Atlanta, GA
Posts: 501
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by truckie515
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=301370"/>
This what I did with mine just use the bolt that you have on the loop or you might get some just a hair longer
This what I did with mine just use the bolt that you have on the loop or you might get some just a hair longer
Is there anything wrong with mounting it to my roller fairlead?
Trending Topics
#8
JK Junkie
Join Date: Aug 2010
Location: Houston, Texas
Posts: 2,908
Likes: 0
Received 0 Likes
on
0 Posts
I have the XHD bumper and Im going to install a 10" Rigid light bar on the hoop. Ive discovered the Rugged Ridge used a very large diameter tubing when making the hoop, its about 2.36 inches in diameter. Since the hoop is a larger than normal diameter I've found it difficult to locate the correct mounting clamps that will fit. Luckily one of the sponsored vendors ,Alternative Offroad, carries the correct mounting clamps tofit the hoop.Ill take some pictures when i mount my light this week.
Last edited by Sapper12b; 04-08-2012 at 10:49 PM.