i was wondering if anybody knows which wire i should splice into in the 2nd lighter output or the passenger side lighter? i want to use a 4way wireless remote controller for led lights for the inside. i was thinking some led's for the dash, under front of the dash and maybe 2 somewhere in the back. the dash ones will have the small led bulbs like pictured in here somewhere. the rest maybe 4-6" tubes. we"ll see. ill take some pics for here once completed. thanks

 

the one that isn't black.

 

so i can use any wire in there besides the black one. i can use the clips from rad shack correct? i hope it works. anybody else have some comments on this

 

Power outlet on the driver's side is switched; power outlet on the passenger side is constant. Black wires are the common ground. Good luck.

 

so once itake the dash off, i should be able to tap into any wire in the pass. side correct

 

tap into any of the two wires going to the power outlet that isn't black.

 

thank you. ill give it a try