Kc light wires
02-26-2013 | 04:12 AM
#1
Thread Starter
JK Newbie
Joined: Feb 2013
Posts: 1
Likes: 0
From: El paso, tx
Kc light wires
Just installed KC Daylighters on my windshield and used rugged ridge rocker switch. I connected the white wire directly to the battery. They work with No problems as of yet. The LED light on the switch stays on however. Will this eventually drain the battery? Was surprised the switch did not come with any directions. I connected the white wire closest to the LED on the switch and the green wire in the middle. Does this sound right?
02-26-2013 | 04:38 AM
#2
JK Junkie
Joined: Nov 2008
Posts: 3,297
Likes: 8
From: Cabot, Ar.
Just installed KC Daylighters on my windshield and used rugged ridge rocker switch. I connected the white wire directly to the battery. They work with No problems as of yet. The LED light on the switch stays on however. Will this eventually drain the battery? Was surprised the switch did not come with any directions. I connected the white wire closest to the LED on the switch and the green wire in the middle. Does this sound right?