alcain4

Can anyone recommend the best place to run wires through the firewall on a 2013 auto trans? Adding KC driving lights and need advice on wiring and where to mount a switch without making it look bad.

Tooadvanced

I ran mine right by brake res. Theres a grommet with wires and I ran mine in thru that next to other wires

AC/DC

My 08 has a hole that is for the clutch master ( mines a/t) so I use that. It's to the right of the brake booster.

catahoula

I ran mine through the passenger side. Went through the right side cowl vent through spray foam. Had to take off side panel of interior dash. If you look at Project-JK you can use that as a reference and he will show you where to go through. Hope this helps.

OH9JK

^^ This ^^

Sahara Lee

X2 Super easy and no damage done if you change your mind.

alcain4

Thanks for the info. Installed KC 100 watt driving lights this weekend on the windshield mount. Found the firewall penetration you mentioned on the driver side. They look awesome, thanks again for the help.

ThwopKing

Where did you mount your switch?

Sent while plotting to take over the world!

tsamptrail

Here are my switches.

alcain4

I mounted my switch in the dash panel under the steering wheel. Looks factory installed.