Front LED Turning Signals
#1
JK Newbie
Thread Starter
Join Date: Jun 2016
Location: Fort Collins
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Front LED Turning Signals
Hello all,
I am planning on installing Oracle Plasma Halo Lights and would like my front turning signals to be LED also. I've researched quite a bit and can't seem to find anything other than the Recon Smoked LEDs which get horrible reviews and seem like a hassle with resistors, wires corroding, and all of that.
Any ideas?
Also has anyone installed the Oracle Plasma lights? If so, any feedback, comments, pros, cons???
Thanks
I am planning on installing Oracle Plasma Halo Lights and would like my front turning signals to be LED also. I've researched quite a bit and can't seem to find anything other than the Recon Smoked LEDs which get horrible reviews and seem like a hassle with resistors, wires corroding, and all of that.
Any ideas?
Also has anyone installed the Oracle Plasma lights? If so, any feedback, comments, pros, cons???
Thanks
Last edited by JBryce19; 11-26-2016 at 11:06 AM.
#6
I use the amazon LED turn signals with no issue, no flickering either.
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
Trending Topics
#8
JK Newbie
Join Date: May 2014
Location: Clarkston, MI
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
#10
Front LED Signals
I knew there are many 4 inch round led signal options available for trailers and big rigs that mount in a rubber grommet the fits in a 4.5 inch hole.
Basically, I found a JK grille on Craigslist for cheap to practice on. I trimmed off the turn signal bucket with a dremmel. Then I centered, traced and opened up those holes where the signal buckets were to 4.5".
Basically, I found a JK grille on Craigslist for cheap to practice on. I trimmed off the turn signal bucket with a dremmel. Then I centered, traced and opened up those holes where the signal buckets were to 4.5".