Custom sub box ideas??
#121
JK Freak
I'm actually working on something similar to this setup. I am hoping to work on it this week after work. I'll take pics and post them as soon as I get to it.
#124
I just got done building a custom box for my 2 door JK after doing a lot of research and not finding exactly what I wanted. I decided to go with a down-firing configuration with a Kicker CompVT-10 (low profile, high output). The box height is 7 3/4" and takes up the whole back trunk. I'll put together a write up on it soon:
Attachment 164319
I liked some of the ideas here, but getting the proper volume (.8 cu ft/ 1383 cu in) was difficult and awkward. I had played with 8" subs without much luck, so I wanted to get a 10" in if I could.
I used Plastidip (3 coats) over primed 3/4" MDF. It's all driven by a Alpine PDX-5.
FWIW, not sure how I feel about the plastidip, but I didn't have any bedliner. I may have to strip this and coat with bedliner instead.
Attachment 164319
I liked some of the ideas here, but getting the proper volume (.8 cu ft/ 1383 cu in) was difficult and awkward. I had played with 8" subs without much luck, so I wanted to get a 10" in if I could.
I used Plastidip (3 coats) over primed 3/4" MDF. It's all driven by a Alpine PDX-5.
FWIW, not sure how I feel about the plastidip, but I didn't have any bedliner. I may have to strip this and coat with bedliner instead.
#125
Here's mine. It's large but It's not only a sub box, but I also made 2 additional compartments in the box that hold a pair of 6x9's and also the 3 amplifiers I have mount to the box.
I can still fit groceries and other stuff behind it, and it also gives me a rear deck to set stuff on.
I can still fit groceries and other stuff behind it, and it also gives me a rear deck to set stuff on.
I have to be honest... that box is ridiculous lol... Why the heck did you make it so big??
#126
Did someone say SUBS.....
Not at all practical and I'm probably going to rip it all out and do a line-x box so that I don't have to worry about destroying my vinyl, but it sure looks pretty.
Attachment 193029
Not at all practical and I'm probably going to rip it all out and do a line-x box so that I don't have to worry about destroying my vinyl, but it sure looks pretty.
Attachment 193029
#127
JK Newbie
Join Date: Aug 2013
Location: The Federal City!!
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
I know, I know... "holy thread revival"...
There just aren't many threads on this subject for Wranglers.
I'm thinking about having an audio store custom build me a wooden floor that I can secure to the floor of my jeep (4-door) in the cargo area. Then just leave a corner out on the front/passenger side so I could have a removable downfiring box for my Kicker Solo Baric 10". I could also have them cut out above the area with the under-floor storage so I can easily access it.
Only real requirement is that my ARB fridge fits on the drivers side of the cargo area.
Ideas?
There just aren't many threads on this subject for Wranglers.
I'm thinking about having an audio store custom build me a wooden floor that I can secure to the floor of my jeep (4-door) in the cargo area. Then just leave a corner out on the front/passenger side so I could have a removable downfiring box for my Kicker Solo Baric 10". I could also have them cut out above the area with the under-floor storage so I can easily access it.
Only real requirement is that my ARB fridge fits on the drivers side of the cargo area.
Ideas?
#128
I know, I know... "holy thread revival"... There just aren't many threads on this subject for Wranglers. I'm thinking about having an audio store custom build me a wooden floor that I can secure to the floor of my jeep (4-door) in the cargo area. Then just leave a corner out on the front/passenger side so I could have a removable downfiring box for my Kicker Solo Baric 10". I could also have them cut out above the area with the under-floor storage so I can easily access it. Only real requirement is that my ARB fridge fits on the drivers side of the cargo area. Ideas?