When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
JK Electrical, Lighting & Sound SystemsBulletin board forum regarding topics such as stereo head units, CD players, MP3 players, speaker systems, amplifiers, hardmounted GPS devices, computers, headlight upgrades, fog lights, off-road lights, general wiring and anti-theft devices.
Replaced my starter for non-start issues to troubleshoot and rule out. When I removed the ground wire connection, the vinyl/plastic jacket was brittle and fell apart to exposed the bare connector. Can I replace and re-crimp a new connector(spade?) or do I have to replace the whole cable or is it not required for the starter to function? I've attached a couple pics as well.
Ok, I was wrong. This IS NOT the ground wire connection. It's the solenoid feed 'spade' connection. My bad, I was told to just tape it. Since I've replaced the starter, it's starting fine. I'll just have to tape up the solenoid feed connector.
01-30-2023, 06:56 AM
2008 Rubi Starter Ground connector
